Rf Engineering

RF Power Divider Amplitude/Phase Imbalance and Isolation Degradation Diagnostic Calculator

RF Power Divider Amplitude/Phase Imbalance and Isolation Degradation Diagnostic engineering calculator.

Quick Answer

Calculate RF Power Divider Amplitude/Phase Imbalance and Isolation Degradation Diagnostic

Calculator

Amplitude-Phase Imbalance and Isolation Degradation Index (dimensionless)
—

Result Interpretation

RF Power Divider Amplitude/Phase Imbalance and Isolation Degradation Diagnostic Calculator computes Amplitude-Phase Imbalance and Isolation Degradation Index in dimensionless using the defined engineering formula and the input values provided.

Worked Example

Verified calculation

Given:

  • Design Center Frequency = 2400000000
  • Input Reflection Coefficient (S11) = 0.1
  • Isolation Coefficient (S23) = 0.0316
  • Measured Resonant Frequency = 2400000000

Expected Result:

  • Amplitude-Phase Imbalance and Isolation Degradation Index = 36.060720181727

Engineering Interpretation:

Under the given input conditions, the calculated result is: Amplitude-Phase Imbalance and Isolation Degradation Index = 36.060720181727 dimensionless.

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

amplitude-phase imbalance and isolation degradation index = sqrt(pow(20 * log(abs(S11))/log(10), 2) + pow(20 * log(abs(S23))/log(10), 2) + pow(2 * abs(design center frequency - measured resonant frequency)/design center frequency * 100, 2))

Formula family: formula_rf_rf_power_divider_isolation_and_imbalance_diagnostic_tool

Variables

SymbolLabelRoleDescription
S11 Input Reflection Coefficient (S11) INPUT Input Reflection Coefficient (S11)
S23 Isolation Coefficient (S23) INPUT Isolation Coefficient (S23)
f0 Design Center Frequency INPUT Design Center Frequency
f_res Measured Resonant Frequency INPUT Measured Resonant Frequency
result Amplitude-Phase Imbalance and Isolation Degradation Index OUTPUT Amplitude-Phase Imbalance and Isolation Degradation Index

Calculation Steps

  1. Enter the input reflection coefficient (s11) in dimensionless.
  2. Enter the isolation coefficient (s23) in dimensionless.
  3. Enter the design center frequency in Hz.
  4. Enter the measured resonant frequency in Hz.
  5. Step 1: Compute amplitude-phase imbalance and isolation degradation index.
  6. Read the amplitude-phase imbalance and isolation degradation index (dimensionless) from the results.

Engineering Summary

Calculate RF Power Divider Amplitude/Phase Imbalance and Isolation Degradation Diagnostic

Frequently Asked Questions

What does this calculator calculate?

The RF Power Divider Amplitude/Phase Imbalance and Isolation Degradation Diagnostic Calculator estimates Amplitude-Phase Imbalance and Isolation Degradation Index based on the input parameters you provide

Why is input reflection coefficient (s11) important in this calculation?

input reflection coefficient (s11) is directly proportional to amplitude-phase imbalance and isolation degradation index. When you enter input reflection coefficient (s11) in dimensionless, the calculator uses it in the engineering formula to compute the output

How should I interpret the result amplitude-phase imbalance and isolation degradation index?

The calculator outputs amplitude-phase imbalance and isolation degradation index in dimensionless. The result is computed directly from the input values using the defined engineering formula

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Input Reflection Coefficient (S11) (dimensionless), Isolation Coefficient (S23) (dimensionless), Design Center Frequency (Hz), Measured Resonant Frequency (Hz). Make sure all inputs use the specified units for consistent results

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

Related Tools

Browse More Tools

Explore the full index of engineering calculators on this vertical site.